Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
Flat / Angle Scraper Bar
Mirrored, flippable blades deliver a perfect road crown (1/2" drop every 12") or dead-flat surface — a finish previously impossible for consumers
Ribbed Hopper
Engineered ribs direct gravel where it’s needed for consistent, even flow
Foldable Skis
Compact storage and transport — plus smooth handling around curves
Pivoting Hopper
Quick, tool-free depth settings: ½" to 4" in ½" increments
Bucket Drag Bar + Lift Bar
Completely non-attaching — Fill, drag, repeat — using only your standard tractor bucket with cutting-edge and arms
Grated Platform
Walk across without disturbing freshly spread material — use to carry a tool for material repositioning in hopper
Built to Last
54” wide hopper
Stainless steel hardware
Bright powder-coated finish
Interchangeable mirrored parts
Quick-release pins for field adjustments
No moving mechanisms. No grease points. No maintenance.*
Accepts common gravel types
Ready to use upon uncrating
Made in the USA • Patented
*The hinges should be spray-lubricated to reduce friction
The GravelMiser works with most standard tractors equipped with a bucket with cutting edge. The cutting edge blade is necessary to interlock with the drag bar. The bucket and tractor require a lift capacity high enough to lift the GravelMiser’s respective weight:
The 8’ GravelMiser (approx 900 lbs) works 5’ buckets.*
The 6’ GravelMiser (approx 732 lbs) works with 5’ & 4’ buckets.
The 5’ Gravel Miser (approx 566 lbs) works with 4’ & 3’ buckets.
*6’ & 7’ buckets may work with the 8’ model to load and drag, but will likely have a blind spot when aligning with the lift bar.
Technical Specifications
Weight - 566 lbs (including crate platform)
Storage Dimensions - 60-1/2”x48”x25”
Freight Charges
Freight is estimated to be an additional $500. You will be contacted with a shipping schedule and freight quote (and payment link) when the order is ready to be fulfilled. Payment for freight will vary depending upon destination.
Flat / Angle Scraper Bar
Mirrored, flippable blades deliver a perfect road crown (1/2" drop every 12") or dead-flat surface — a finish previously impossible for consumers
Ribbed Hopper
Engineered ribs direct gravel where it’s needed for consistent, even flow
Foldable Skis
Compact storage and transport — plus smooth handling around curves
Pivoting Hopper
Quick, tool-free depth settings: ½" to 4" in ½" increments
Bucket Drag Bar + Lift Bar
Completely non-attaching — Fill, drag, repeat — using only your standard tractor bucket with cutting-edge and arms
Grated Platform
Walk across without disturbing freshly spread material — use to carry a tool for material repositioning in hopper
Built to Last
54” wide hopper
Stainless steel hardware
Bright powder-coated finish
Interchangeable mirrored parts
Quick-release pins for field adjustments
No moving mechanisms. No grease points. No maintenance.*
Accepts common gravel types
Ready to use upon uncrating
Made in the USA • Patented
*The hinges should be spray-lubricated to reduce friction
The GravelMiser works with most standard tractors equipped with a bucket with cutting edge. The cutting edge blade is necessary to interlock with the drag bar. The bucket and tractor require a lift capacity high enough to lift the GravelMiser’s respective weight:
The 8’ GravelMiser (approx 900 lbs) works 5’ buckets.*
The 6’ GravelMiser (approx 732 lbs) works with 5’ & 4’ buckets.
The 5’ Gravel Miser (approx 566 lbs) works with 4’ & 3’ buckets.
*6’ & 7’ buckets may work with the 8’ model to load and drag, but will likely have a blind spot when aligning with the lift bar.
Technical Specifications
Weight - 566 lbs (including crate platform)
Storage Dimensions - 60-1/2”x48”x25”
Freight Charges
Freight is estimated to be an additional $500. You will be contacted with a shipping schedule and freight quote (and payment link) when the order is ready to be fulfilled. Payment for freight will vary depending upon destination.